REBAR CUTTER
The B & A Rebar Cutter is an easy method for drilling through embedded rebar and the surrounding concrete. The B & A Rebar Cutter can be used in a 1/2" drill motor equipped with a 3-Jawed Chuck or directly in the hammer motor utilizing the B & A Rotary Chuck Driver™ adapter. The B & A Rebar Cutter can be used in any 1/2" capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R. P. M. to 1,200 R. P. M. This includes most combination hammer drills, but when using a combination hammer drill the selector switch must be in the rotary only position! The B & A Rebar Cutter can be used in a Spline Drive Hammer, a SDS MAX ®™ Hammer, or a SDS PLUS ®™ Hammer by utilizing the B & A Rotary Chuck Driver™.