|
CONCRETE SCREW ANCHOR DRILL BITS
Concrete Screw Bits are used to pre drill hole used for self
tapping concrete anchors and are specifically designed for use
with TAPCON ®™ concrete screw anchors. When using self tapping
concrete anchors, such as TAPCON ®™ concrete screw anchors, pre
drilling the right size hole is critical. Make the hole too
large and the self tapping concrete anchor screw will fail to
achieve maximum holding power and possible fail to hold
completely. A small hole will result in the self tapping screw
anchor binding in the hole, twisting of the head, breaking or
snapping off above or below the surface. Each bit is precisely
sized to match the required tolerances necessary to achieve
maximum holding power from self tapping concrete screws. Holes
that are pre drilled using the properly chosen Tang or SDS PLUS ®
5/16" Hex Combo will prevent physical damage to the anchor
caused by the anchor bind in the hole. Constructed of hardened
alloy steel with a close tolerance carbide tip, it is available
in both Tang style shank and SDS PLUS ® 5/16" Hex Combo Shank.
SDS CONCRETE SCREW
|
|
CONCRETE SCREW
BIT SELECTOR CHART |
|
CONCRETE
SCREW
SIZE |
DRILL BIT |
|
TANG SHANK |
SDS PLUS ® SHANK |
|
3/16 x 1-1/4" |
TG-5323 |
TH-5326 |
|
3/16 x 1-3/4" |
TG-5323 |
TH-5326 |
|
3/16 X 2-1/4" |
TG-5324 |
TH-5327 |
|
3/16 x 2-3/4" |
TG-5324 |
TH-5327 |
|
3/16 x 3-1/4" |
TG-5325 |
- |
|
3/16 x 3-3/4" |
TG-5325 |
- |
|
3/16 x 4" |
TG-5325 |
- |
|
1/4 x 1-3/4' |
TG-3163 |
TH-3166 |
|
1/4 X 2-1/4" |
TG-3164 |
TH-3167 |
|
1/4 x 2-3/4" |
TG-3164 |
TH-3167 |
|
1/4 x 3-1/4" |
TG-3165 |
- |
|
1/4 x 3-3/4" |
TG-3165 |
- |
|
1/4 x 4" |
TG-3165 |
- |
|
1/4 x 5" |
TG-3166 |
- |
|
1/4 x 6" |
TG-3167 |
- |
|
